All Catalog

Fiber Optic Patch Cord

  • PVC/LSZH/OFNPN Jackets
  • Standard Connector: LC/SC/ST/FC/LSH/MU/MTRJ
  • Fiber Mode: OS2/OM1/OM2/OM3/OM4/OM5
  • Fiber Count: Simplex or Duplex
  • Cable Diameter:0.9/2.0/3.0mm
  • Cable Length:0.5/1/2/3/5/10/15/30/50/100m, Customized
  • Low Loss
  • Optical Testing Ensures Network Performance
  • Compliant to TIA-604 (FOCIS)

Product Details:

fiber patch cable,fibre patch cale

Help to choose your required optic fiber patch cords?

Step 1: Choose the correct connectors for the fiber patch cords. Both endings can come with different types of connectors. There are many connector types available.

LC connector
1.25mm LC is mainly used for matching SFP/SFP+/XFP transceivers. Higher-density connections.
SC connector
2.5 mm SC is mainly used for EPON, GPON, GBIC, X2, and XENPAK transceivers, telecom, and datacom.
LSH Connector
LSH(E2000) is mainly used for telecommunication networks, fiber CATV, FTTH, etc.
ST connector
2.5 mm ST is mainly used for Military, campuses, FTTH, datacom, and corporate networks.
FC connector
2.5 mm FC is mainly used for Telecom, datacom, single-mode lasers, and measurement equipment.
MU connector
Mainly used for data centers, enterprise networks, and 2x fiber cabling density over SC connectors.

Step 2: Choose the polish type of connectors. There are two types of connector polish, UPC and APC.

Two Polish Types for Various Signal Sensitivity Demands.
Please Note. UPC and APC connectors couldn't be mated together - they are not compatible with each other.
fiber patch cable,fibre patch cale
No angles, with high return loss than APC polishment, are mainly used for used for TV, telephony, and data systems.
fiber patch cable,fibre patch cale
With 8 degrees angle, has better performance(lower return loss) than APC, which is mainly used for FTTH, PON, WDM systems, etc.

Step 3: According to the number of fiber strands, Optic fiber patch cords can have two types of strands: simplex or duplex.

Choose which type of strands you will need, Simplex or Duplex?

simplex connector


A simplex cable has one single strand of fiber with one simplex connector on each end. One end is a transmitter, the other end is the receiver, and these are not reversible. This is commonly used for Bidirectional (BIDI) fiber optic transceivers. Simplex cables are less expensive and can transmit at higher speeds.
Duplex connector


A duplex cable has two strands of fibers with a duplex fiber optic connector, One strand transmits one way, and the other strand transmits back the opposite way. This is a huge advantage over simplex because it can transmit simultaneous bidirectional data. This is a huge advantage over Simplex because it can transmit simultaneous bidirectional data.

Step 4: Choose which fiber mode you will need, Single mode or Multi mode?

Single-mode fiber(Yellow)

Single-mode fiber optic patch cable is for long-distance data transmission because a single-mode fiber optic cable is significantly faster than a multimode. Single-mode only carries one beam of light at a time, which allows the laser to operate at 1310-1550 nm wavelength.

single mode fiber optic patch cord

Multi-mode fiber

Multimode fiber optics for shorter distances applications, like within a building or an A/V application within the local network. The maximum length for a fiber optic cable is about 400 to 550 meters. But multimode cables can carry multiple light sources, making them very efficient for short distances. 

Identified by ISO 11801 standard, multimode fiber optic cables can be classified into OM1 fiber, OM2 fiber, OM3 fiber, OM4 fiber and newly released OM5 fiber.

OM1 OM2 fiber optic patch cord


om3 om4 fiber optic patch cord


OM5 fiber optic patch cord


What the differences between OM1, OM2, OM3, OM4, OM5?

MMF Cable TypeDiameterJacket ColorOptical SourceBandwidthFast Ethernet1GbE10GbE40GbE100GbE
OM550/125µmLime GreenVSCEL28000MHz*km//550m150m150m


Step 5: Choose the jacket material. A standard fiber patch cord can come in different material jacket.

The difference between OFNP, PVC, and LSZH material jackets.
fiber patch cable,fibre patch cale

Step 6: According to your needs, decide the cable length you’ll use. You need to know the distance between your devices and then decide the cable length you’ll use. The most common lengths are 0.5/1/2/3/5/10/15/30/50/100m, the cable length also can be customized.

Strictly Testing Before Shipping

insertion-return loss testing

Inserting Loss/Return Loss detection

fiber patch cable,fibre patch cale

3D Interference Test

fiber patch cable,fibre patch cale
Endface Cleanliness Inspection

Need to buy Standard Fiber Patch Cord?

Let's talk

fiber patch cable,fibre patch cale

Easy shop

fiber patch cable,fibre patch cale

Professional Seller

fiber patch cable,fibre patch cale

Excellent Quality

fiber patch cable,fibre patch cale

Global Shipping

fiber patch cable,fibre patch cale

Fast Delivery

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “”.